Ignition Key Cannot Be Removed from the Ignition Lock Cylinder
Ignition Key Cannot Be Removed from the Ignition Lock Cylinder
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you review the Steering Wheel and Column Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Steering Wheel and Column - Tilt |
| 2 | Verify that the key cannot be removed from the lock cylinder in the OFF position. Does the lock system operate normally? |
System OK | Go to Step 3 |
| 3 | Inspect for incorrect, worn, or damaged key. Is the key incorrect, worn, or damaged? |
Go to Step 5 | Go to Step 4 |
| 4 | Inspect for a faulty lock cylinder or release button. Is the lock cylinder or release button damaged? |
Go to Step 6 | Go to Step 3 |
| 5 | Replace the key. Refer to Key and Lock Cylinder Coding
in General Information. Did you complete the repair? |
Go to Step 7 | - |
| 6 | Replace the lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle . Did you complete the repair? |
Go to Step 7 | - |
| 7 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |