Windshield Washer Spray Nozzle: Service and Repair

REMOVAL PROCEDURE
1. Use a small flat-bladed tool in order to remove the nozzle (2) from the liftgate.
2. Remove the washer hose (1) from the nozzle (2).

INSTALLATION PROCEDURE
1. Install the washer hose (1) to the nozzle (2).
2. Perform the following steps in order to install the nozzle (2) to the liftgate:
2.1. Align the nozzle (2) to the hole.
2.2. Push in the nozzle (2).