37. Torque Converter Oil Seal Disassemble

^ Tools Required
- J 6125-1B Slide Hammer
- J 23129 Converter Housing Seal Remover





1. Assemble J 6125-1B and J 23129.

Important: Do not damage the transmission case during the removal of the torque converter seal assembly.

2. Remove the oil seal assembly (525) from the case:
^ Use J 6125-1B and J 23129 in order to remove the seal
^ Alternately, use a large, flat blade screwdriver in order to pry out the seal. Use a block of wood to pry against