LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Gear >> Service and Repair >> Power Steering Gear Heat Shield Replacement

Power Steering Gear Heat Shield Replacement

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Remove the steering gear heat shield bolts/screws.
3. Remove the steering gear heat shield.

Installation Procedure
1. Install the steering gear heat shield.





2. Install the steering gear heat shield bolts/screws.
3. Lower the vehicle.

scientia non olet · About LEMON Manuals