A/T Shift Lock Control Actuator

Removal Procedure
1. Turn the ignition OFF.
2. Remove the lower steering column shroud. Refer to Steering Column Trim Covers - Disassemble -Off Vehicle.
3. Remove the shift lock control from the steering column. Refer to Automatic Transmission Shift Lock Control - Disassemble - Off Vehicle.

Installation Procedure
1. Install the shift lock control to the steering column. Refer to Automatic Transmission Shift Lock Control - Assemble - Off Vehicle.
2. Remove the lower steering column shroud. Refer to Steering Column Trim Covers - Assemble - Off Vehicle.