LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Seat Belt >> Service and Repair >> Seat Belt Replacement >> Center Rear (60/40 Split Bench)

Center Rear (60/40 Split Bench)

REMOVAL PROCEDURE




1. Remove the rear seat.
2. Remove the recliner trim cover.
3. Remove the rear seat riser.
4. Unhook the seat cushion cover retainers from the seat frame.
5. Remove the bolts securing the buckle side belts from the seat cushion frame.




6. Remove the buckle side belts (1) from the seat.
7. Remove the bolt securing the mini-buckle (2) from the 60 percent seat cushion frame.

INSTALLATION PROCEDURE




1. Install the bolt securing the mini-buckle (2) to the 60 percent seat cushion frame.
2. Install the buckle side belts (1) to the seat.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the mini-buckle bolt to 53 N.m (39 lb ft).




3. Install the bolts securing the buckle side belts (1) to the seat cushion frame.

Tighten
Tighten the rear seat buckle belt bolts to 53 N.m (39 lb ft).

4. Hook the seat cushion cover retainers to the seat frame.
5. Install the rear seat riser.
6. Install the recliner trim cover.
7. Install the rear seat.
scientia non olet · About LEMON Manuals