Seat Belt Buckle Pretensioner Replacement - RH

REMOVAL PROCEDURE




1. Perform the Air Bag(s) Arming and Disarming Procedure.
2. Remove the passenger front seat.
3. Remove the passenger seat adjuster track cover (1).




4. Remove the nut (1) from the passenger seat belt pretensioner.




5. Route the passenger seat belt pretensioner wiring harness (2) through the passenger seat bottom frame.
6. Remove the passenger seat belt pretensioner (1) from the passenger seat bottom frame.

INSTALLATION PROCEDURE




1. Install the passenger seat belt pretensioner (1) to the passenger seat bottom frame.
2. Route the passenger seat belt pretensioner wiring harness (2) through the passenger seat bottom frame.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the nut (1) to the passenger seat belt pretensioner.

Tighten
Tighten the passenger seat belt pretensioner nut to 35 N.m (26 lb ft).




4. Install the passenger seat adjuster track cover (1).
5. Install the passenger front seat.
6. Enable the SIR system. Refer to the Air Bag(s) Arming and Disarming Procedure.