Right Front

REMOVAL PROCEDURE
1. Remove the front seat inboard finish panel.
2. Remove the nut (2) securing the buckle side belt (1) from the seat cushion frame.
3. Remove the buckle side belt from the seat.

INSTALLATION PROCEDURE
1. Install the buckle side belt (1) to the seat.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nut (2) securing the buckle side belt to the seat cushion frame.

Tighten
Tighten the front seat buckle side belt nut to 53 N.m (39 lb ft).

3. Install the front seat inboard finish panel.