Rear (Captains Chair)

REMOVAL PROCEDURE
1. Remove the seat cushion finish covers.
2. Remove the nut (2) securing the buckle side belt from the seat cushion frame.
3. Remove the buckle side belt from the seat

INSTALLATION PROCEDURE
1. Install the buckle side belt to the seat.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nut securing buckle side belt to the seat cushion frame.

Tighten
Tighten the rear seat buckle belt nut to 53 N.m (39 lb ft).

3. Install the seat cushion finish covers.