LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Fuel Delivery and Air Induction >> Fuel Pump Relay >> Service and Repair

Fuel Pump Relay: Service and Repair

REMOVAL PROCEDURE
The fuel pump relay is mounted in the right front corner of the engine compartment.
1. Turn OFF the ignition.
2. Remove the fuel pump relay retaining bolt.
3. Disconnect the fuel pump relay electrical connector.
4. Remove the relay from the vehicle.

INSTALLATION PROCEDURE
1. Connect the fuel pump relay electrical connector.
2. Position the fuel pump relay on the radiator core support.
3. Install the fuel pump relay retaining screw through the relay into the radiator core support.