Exhaust Pipe/Muffler Hanger: Service and Repair

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the muffler hanger insulators from the muffler.
3. Remove the muffler hanger bolts.
4. Remove the muffler hanger.

Installation Procedure





1. Install the muffler hanger.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the muffler hanger bolts.
^ Tighten the muffler hanger bolts to 35 Nm (26 ft. lbs.).
3. Install the muffler hanger insulators to the muffler.
4. Lower the vehicle.