Rotating the Engine For Service Access

ROTATING THE ENGINE FOR SERVICE ACCESS.

^ Tools Required
- J 41131 Engine Tilt Strap

1. Remove the throttle body air inlet duct. Service and Repair
2. Set the park brake.
3. Shift the transaxle into Neutral.
4. Remove the engine mount strut bolts. Swing the engine mount struts aside. Refer to Engine Mount Strut Replacement (Left) or Engine Mount Strut Replacement (Right).





5. Install the J 41131.
6. Pull on the engine in order to rotate the engine forward.
7. Tighten the J 41131.