Fuel Pressure Release: Service and Repair

RELIEF PROCEDURE

TOOLS REQUIRED
^ J34730-1A Fuel Pressure Gauge
^ J 34730-262 Fuel Pressure Gauge Fitting

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery terminal.

IMPORTANT: Mount the fuel pressure gauge fitting above the belt to avoid contact with the belt.

2. Install the J 34730-262 Fuel Pressure Gauge Fitting adaptor to the fuel pressure connection.
3. Connect Fuel Pressure Gauge J34730-1A to the fuel adaptor pressure fitting. Wrap a shop towel around the fuel pressure connection while connecting the fuel pressure gauge in order to avoid spillage.
4. Install the bleed hose into an approved container and open the valve to bleed the system pressure. The fuel connections are now safe for servicing.
5. Drain any fuel remaining in the fuel pressure gauge into an approved container.