Luggage Carrier Cross Rail Replacement

Luggage Carrier Cross Rail Replacement

Removal Procedure

1. Remove the luggage carrier. Refer to Luggage Carrier Replacement (Luggage Carrier Replacement) .
2. Turn the luggage carrier upside down and place on a clean flat surface.




3. Remove the luggage carrier cross rail screws from the luggage carrier side rails.
4. Remove the luggage carrier cross rail from the luggage carrier side rails.



Installation Procedure





1. Install the luggage carrier cross rail to the luggage carrier side rail.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the luggage carrier cross rail screws to the luggage carrier.

Tighten the screws to 2 N.m (18 lb in).

3. Install the luggage carrier. Refer to Luggage Carrier Replacement (Luggage Carrier Replacement) .