LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Cowl Side Trim Panel Replacement

Cowl Side Trim Panel Replacement



Cowl Side Trim Panel Replacement

Tools Required

J 38778 Door Trim Pad Clip Remover


Removal Procedure

1. Remove the front door sill plate. Refer to Door Sill Plate Replacement (Door) (Door Sill Plate Replacement)Door Sill Plate Replacement (Sliding Door) (Door Sill Plate Replacement (Sliding Door)) .




2. Remove the cowl side trim panel retainers using the J 38778 .
3. Remove the cowl side trim panel from the vehicle.



Installation Procedure





1. Install the cowl side trim panel to the vehicle by aligning the trim panel with the slots in the cowl.
2. Install the cowl side trim panel retainers by pushing in on the panel to secure.
3. Install the front door sill plate. Refer to Door Sill Plate Replacement (Door) (Door Sill Plate Replacement)Door Sill Plate Replacement (Sliding Door) (Door Sill Plate Replacement (Sliding Door)) .