Hood Latch Support Replacement

Hood Latch Support Replacement

Removal Procedure

1. Open and support the hood.
2. Remove the primary hood latch. Refer to Hood Primary Latch Replacement (Hood Primary Latch Replacement) .




3. Remove the bolts from the hood latch support at the upper tie bar.
4. Remove the hood latch support from the upper tie bar.



Installation Procedure





1. Install the hood latch support to upper tie bar.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts to the hood latch support at the upper tie bar.

Tighten the bolts to 25 N.m (18 lb ft).

3. Install the primary hood latch. Refer to Hood Primary Latch Replacement (Hood Primary Latch Replacement) .
4. Close the hood.