How to Enter Diagnostics

Entering PSD diagnostics is done by gaining entry into Diagnostic Mode 1. Refer to How to Enter Diagnostic Mode 1 within Power Sliding Door Diagnostic Information.

Diagnostic Mode 2 may only be entered from Diagnostic Mode 1 after it has been performed. Refer to How to Enter Diagnostic Mode 2 from Diagnostic Mode 1 within Power Sliding Door Diagnostic Information.

Diagnostic Mode 3 may only be entered from Diagnostic Mode 2 after it has been performed. Refer to How to Enter Diagnostic Mode 3 from Diagnostic Mode 2 within Power Sliding Door Diagnostic Information.

The diagnostic modes can only be entered in order.