Adjusting the Speakers (UT6, U1P, U1Q)

BAL-FADE
This button adjusts balance and fade. To adjust balance:
1. Press the BAL-FADE button until BAL appears on the display. SELECT will appear on the display to show that the speakers can be adjusted.
2. Turn the SELECT knob clockwise for the right speaker and counterclockwise for the left speaker. The middle position balances the sound between the speakers.

To adjust FADE:
1. Press the BAL-FADE button until FAD appears on the display.
2. Turn the SELECT knob clockwise for the front speaker and counterclockwise for the back speaker. The middle position balances the sound between the speakers.
3. Press hold this button for two seconds to return both fade and balance to the middle position.

For a description of the RPO Code(s) shown in this article, refer to the RPO Code List found at Vehicle/Application and ID. Application and ID