LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Suburban C2500 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels - New Style >> Symptom Tests >> Test 7: Odometer Does Not Switch Between Trip And Odometer >> Notes

Test 7: Odometer Does Not Switch Between Trip And Odometer: Notes

  1. Perform INSTRUMENT PANEL CLUSTER (IPC) DIAGNOSTIC SYSTEM CHECK before proceeding. See INSTRUMENT PANEL CLUSTER (IPC) DIAGNOSTIC SYSTEM CHECK  under SYSTEM TEST. If INSTRUMENT PANEL CLUSTER (IPC) DIAGNOSTIC SYSTEM CHECK has been performed, go to next step.
  2. Press and release trip reset button several times. If odometer display does not switch between trip and odometer each time trip reset button is pressed, go to next step. If odometer display switches between trip and odometer each time trip reset button is pressed, check for an intermittent problem caused by poor connections, a break in wire insulation, or a broken wire inside insulation. See WIRING DIAGRAMS .
  3. Replace IPC. See INSTRUMENT PANEL CLUSTER (IPC)  under REMOVAL & INSTALLATION. After repair, go to next step.
  4. Road test vehicle to check speedometer/odometer operation. If system operates properly, repair is complete. If problem still exists, go to DIAGNOSTIC AIDS .
scientia non olet · About LEMON Manuals