LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Monte Carlo LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Instrument Panel Cluster (IPC) >> Removal & Installation

Removal & Installation

  1. If equipped with column shift, move shift lever to L1. On all models, tilt steering column to lowest position. Unsnap instrument panel cluster trim plate from clips, and remove from vehicle.
  2. Remove instrument panel cluster bolts/screws. Pull assembly rearward, and disconnect electrical connector. Remove instrument panel cluster. To install, reverse removal procedure. Tighten instrument panel cluster bolts/screws to 18 INCH lbs. (2 N.m).