Activating System (Sierra, Silverado, Suburban, Tahoe & Yukon)

1. Remove key from ignition switch. Connect the passenger side air bag 2-pin Yellow SIR connector. Install CPA clip. Repeat procedure for driver side air bag connector.
2. Connect passenger air bag 2-pin Yellow SIR connector behind glove box. Install CPA clip. Connect driver air bag 2-pin Yellow SIR connector at base of steering column. Install CPA clip.
3. Install AIR BAG fuse in fuse block. Staying away from both air bags, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.

Fig 1: Locating Driver Air Bag Yellow 2-Pin Connector ("C" & "K" Pickup, Escalade, Sierra, Silverado, Suburban, Tahoe & Yukon)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Locating Passenger Air Bag Yellow 2-Pin Connector (Sierra, Silverado, Suburban, Tahoe & Yukon)

Courtesy of GENERAL MOTORS CORP.