Flywheel to Torque Converter Bolts

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the torque converter covers. Refer to Torque Converter Cover Replacement.
3. Remove the flywheel to torque converter bolts.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the flywheel to torque converter bolts.
- Tighten the flywheel to torque converter bolts to 63 Nm (47 ft. lbs.).
2. Install the torque converter covers. Refer to Torque Converter Cover Replacement
3. Lower the vehicle.