LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Impala V6-3.8L VIN K >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Repair Instructions >> 46. Driven Sprocket Support Assemble

46. Driven Sprocket Support Assemble

^ Tools Required
- J 8092 Driver Handle
- J 28677 Drive Sprocket Support Bearing Installer





1. Install the drive sprocket support assembly (522).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the four drive sprocket support bolts (524).
^ Tighten the bolts to 25 Nm (18 ft. lbs.).





3. Assemble J 28677 and J 8092.

Important: Install the bearing (521) with the marked side facing up.

4. Using the assembled tool, install the drive sprocket support bearing assembly (521).
scientia non olet · About LEMON Manuals