LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Impala V6-3.8L VIN K >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Repair Instructions >> 139. Right Drive Shaft Oil Seal Assemble

139. Right Drive Shaft Oil Seal Assemble

^ Tools Required
- J 29130 Axle Seal Installer
- J 8092 Driver Handle





Important: Inspect the axle oil seal assembly (4). Be sure that the seal was not damaged during assembly. Check that the garter spring was not dislodged.

Use J 29130 and J 8092 in order to install the axle oil seal assembly (4) on the case extension assembly.