LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Impala V6-3.8L VIN K >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Sensors and Switches - A/T >> Fluid Pressure Sensor/Switch >> Service and Repair >> Pressure Control Solenoid Replacement

Pressure Control Solenoid Replacement

Removal Procedure





1. Remove the case side cover. Refer to Case Side Cover Replacement.
2. Disconnect the transaxle wiring harness.
3. Remove the pressure control solenoid (322).

Installation Procedure





1. Install the pressure control solenoid (322).
2. Connect the transaxle wiring harness.
3. Install the case side cover. Refer to Case Side Cover Replacement.
scientia non olet · About LEMON Manuals