Window Panel Lamp Replacement - Rear (Police Option)

REMOVAL PROCEDURE




1. Remove the rear seat back.
2. Remove the bolts from the rear window panel lamp bracket(s).




3. Disconnect the electrical connector(s).
4. Remove the rear window panel lamp(s) from the rear window panel.

INSTALLATION PROCEDURE




1. Connect the electrical connector.




2. Position the rear window panel lamp bracket(s) to the rear window panel.
3. Install the bolts to the rear window panel bracket(s).

Tighten
Tighten the bolts to the rear window panel bracket(s) to 3 N.m (27 lb in).

4. Install the rear seat back.

RPO 6J6: For a Description of RPO Code(s) shown in this article refer to the RPO Code List found at Vehicle/Application and ID RPO Codes