Cabin Air Filter / Purifier: Service and Repair

PASSENGER COMPARTMENT AIR FILTER REPLACEMENT (IF EQUIPPED)

REMOVAL PROCEDURE




1. Position the windshield wipers in the UP position, by keying the ignition OFF when the wiper reach the desired position.
2. Raise the hood.
3. Position aside the rear hood seal halfway to the center. Refer to Seal Replacement - Hood Rear in Body Front End.
4. Remove the right air inlet grill.
5. Remove the passenger compartment air filter.

INSTALLATION PROCEDURE




1. Install the passenger compartment air filter.
2. Install the air inlet grill. Refer to Air Inlet Grille Panel Replacement in Body Front End.
3. Install the rear hood seal.
4. Close the hood.
5. Return the windshield wipers to the PARK position.