Blower Motor and Fan Replacement

REMOVAL PROCEDURE




1. Disconnect the battery negative cable.
2. Remove the right side instrument panel insulator.
3. Disconnect the blower motor electrical connector.




4. Disconnect the blower motor cooling hose.
5. Remove the blower motor mounting bolts.
6. Remove the blower motor.

INSTALLATION PROCEDURE




1. Install the blower motor.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the blower motor bolts.

Tighten
Tighten the blower motor bolts to 1.3 N.m (12 lb in).

3. Connect the blower motor cooling hose.




4. Connect the blower motor electrical connector.
5. Install the right side instrument panel insulator.
6. Connect the battery negative cable.