Muffler Hangers Replacement

(Impala Muffler Rear Hanger Bracket)
Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the exhaust pipe rear hanger insulators (3) from the exhaust muffler rear hanger bracket.
3. Remove the exhaust muffler rear hanger bracket bolts (2).
4. Remove the exhaust muffler rear hanger bracket (1).

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the exhaust muffler hanger bracket (1) and bolts (2) to the bumper rail.
Tighten the exhaust muffler rear hanger bracket bolts to 25 Nm (18.4 ft. lbs.).
2. Install the exhaust pipe rear hanger insulators (3) to the exhaust muffler rear hanger bracket.
3. Lower the vehicle.