LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Impala V6-3.8L VIN K >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 94. Engine Flywheel Installation

94. Engine Flywheel Installation

- Tools Required
- J 36660-A Torque Angle Meter





1. Install the flywheel.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the new flywheel bolts.
Tighten the bolts to 15 Nm (11 ft. lbs.). Use the J 36660-A to tighten the bolts an additional 50 degrees.
scientia non olet · About LEMON Manuals