LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Impala V6-3.8L VIN K >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 78. Crankshaft Front Oil Seal Installation

78. Crankshaft Front Oil Seal Installation


- Tools Required
- J 35354 Seal Installer





1. Coat the inside diameter of the crankshaft front oil seal with lubricant GM P/N 10522497 or equivalent.
2. Use J 35354 and a soft faced hammer to install the crankshaft front oil seal.
3. Remove J 35354.
scientia non olet · About LEMON Manuals