Engine Mount Strut Bracket Replacement (Right Lower)

Removal Procedure





1. Remove the lower engine mount strut bracket bolts.
2. Remove the lower engine mount bracket nut.
3. Remove the lower engine mount bracket.

Installation Procedure





1. Install the lower engine mount bracket to the exhaust manifold stud and the upper engine mount strut bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the lower engine mount strut bracket nut and bolts.
Tighten the lower engine mount bracket nut and bolt to 30 Nm (22 ft. lbs.).
Tighten the lower engine mount bracket bolts to 50 Nm (37 ft. lbs.).