Throttle Body Heater Hose Replacement - Outlet

Removal Procedure





1. Carefully disconnect the throttle body air inlet duct.
2. Drain the cooling system. Refer to Draining and Filling Cooling System.
3. Disconnect the throttle body outlet hose clamp and the hose (4) from the coolant pipe.
4. Disconnect the throttle body outlet hose clamp and the hose (4) from the throttle body.
5. Remove the throttle body outlet hose (4).

Installation Procedure





1. Install the throttle body outlet hose (4).
2. Connect the throttle body outlet hose and the clamp (4) to the throttle body.
3. Connect the throttle body outlet hose and the clamp (4) to the coolant pipe.
4. Install the throttle body air inlet duct.
5. Fill the cooling system. Refer to Draining and Filling Cooling System.
6. Inspect for leaks.