Parking Brake Shoe: Service and Repair

Removal Procedure





1. Remove the caliper bracket. Refer to Brake Caliper Bracket Replacement (Front) or Brake Caliper Bracket Replacement (Rear).
2. Remove the rotor. Refer to Brake Rotor Replacement (Front) or Brake Rotor Replacement (Rear).
3. Remove the rear wheel hub. Refer to Wheel Bearing/Hub Replacement - Rear.
4. Remove the parking brake actuator (5). Refer to Park Brake Actuator Replacement
5. Remove the park brake shoe.

Installation Procedure

Important: Ensure that the park brake shoe (1) engages the Park brake actuator.





1. Install shoe and lining.





2. Install the rear wheel hub. Refer to Wheel Bearing/Hub Replacement - Rear.
3. Install the parking brake actuator. Refer to Park Brake Actuator Replacement.
4. Install the rear wheel hub. Refer to Wheel Bearing/Hub Replacement - Rear.
5. Adjust the rear parking brake shoe. Refer to Park Brake Cable Service/Adjustment.
6. Install the rotor. Refer to Brake Rotor Replacement (Front) or Brake Rotor Replacement (Rear).
7. Install the caliper bracket. Refer to Brake Caliper Bracket Replacement (Front) or Brake Caliper Bracket Replacement (Rear).