Door Bottom Auxiliary Sealing Strip Replacement (Front)

Door Bottom Auxiliary Sealing Strip Replacement (Impala and Monte Carlo Front)

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure




1. Open the front door.
2. Remove the push-in retainers from the front door bottom auxiliary sealing strip using the J 38778 .
3. Remove the door bottom auxiliary sealing strip from the front door.

Installation Procedure




1. Install the front door bottom auxiliary sealing strip to the front door.
2. Stretch the door bottom auxiliary sealing strip in order to align the push-in retainers to the holes in the front door.
3. Install the push-in retainers to the door bottom auxiliary sealingstrip.
4. Close the front door.