Plenum Water Deflector Replacement

Plenum Water Deflector Replacement

Removal Procedure




1. Open the hood.
2. Remove the right side of the air inlet grille. Refer to Air Inlet Grille Panel Replacement (Air Inlet Grille Panel Replacement).
3. Remove the plenum chamber deflector from the pinch-weld flange, by lifting up and out.

Installation Procedure




1. Install the plenum chamber deflector to the pinch-weld flange.
2. Install the right side of the air inlet grille. Refer to Air Inlet Grille Panel Replacement (Air Inlet Grille Panel Replacement).
3. Close the hood.