Rear Seat Cushion Cover Replacement

Rear Seat Cushion Cover Replacement

Removal Procedure

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).




2. Remove the hog rings from the rear seat cushion cover.




3. Reach inside of the rear seat cushion cover in order to unfasten the hook and the loop retainers securing the rear seat cushion cover to the pad.




4. Remove the rear seat cushion cover from the pad.

Installation Procedure




1. Position the rear seat cushion cover to the pad.




2. Align the alignment marks on the rear seat cushion cover to the alignment marks on the pad.




3. Pull the rear seat cushion cover over the pad and aline the hook and the loop retainers.




4. Pull the rear seat cushion cover over the pad and pull over and under the edge.




5. Use firm hand pressure in order to fasten the hook and the loop retainers, securing the rear seat cushion cover to the pad.




6. Align the alignment marks on the rear seat cushion cover to the alignment marks on the pad, on the back side.




7. Install the hog rings to the rear seat cushion cover.
8. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).