Seats: Adjustments

Front Seat Adjustment

Seat Adjustment at Floorpan Attachment





Important: Do not overtighten the adjuster-to-floorpan bolts. Over torqued bolts may cause a hard seat travel condition.


The bolts that attach the seat adjusters to the floor pan allow a small amount of adjustment in the following directions: This adjustment is used to help correct the following conditions:

* Fore and aft
* Side to side

The adjustment can be used for the following purposes:

* Alignment of the seat
* Alignment of the seat adjusters with each other

The adjustment can be used to help correct the following conditions:

* Hard or slow operation that is caused by misalignment of the adjusters
* Inability of the manually operated seat adjuster to lock.