Sunshade Panel Replacement

REMOVAL PROCEDURE




1. Remove the sunroof glass panel.
2. Use a flat-bladed tool to push the sunshade slide blocks into the sunshade to release them from the sunroof guide assembly on one side of the sunshade. Hold the slide blocks in the released position and lift that side of the sunshade up.
3. Remove the sunshade panel through the roof opening.

INSTALLATION PROCEDURE




1. Install the sunshade panel through the roof opening.
2. Insert the slide blocks on the right side of the sunshade into the sunroof guide assembly.
3. Push the sunshade slide locks on the left side of the sunshade into the sunshade to allow the sunshade to drop into position. Once the sunshade is in position, engage slide blocks into the left guide assembly.
4. Slide the sunshade forward and backward to check for smooth operation.
5. Install the sunroof glass panel.