Rear Bumper Fascia Outer Support Replacement

Rear Bumper Fascia Outer Support Replacement (Impala)

Tools Required

J 38778 Door Trim Pad Clip Removal

Removal Procedure




1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Impala) (Service and Repair).
2. Remove the rear bumper fascia reinforcement outer push-in retainers using J 38778 .
3. Remove the rear bumper fascia reinforcement outer from the rear bumper fascia.

Installation Procedure




1. Install the rear bumper fascia reinforcement outer to the rear bumper fascia.
2. Install the rear bumper fascia reinforcement outer push-in retainers.
3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Impala) (Service and Repair.