Radio Chime Volume Selection

In order to set the chime volume, begin at the Special Functions screen. Repeat step 1 through step 7 of the Radio Setup, if needed.
1. At the Special Functions screen, select F2: Set Options.
2. At the Set Options screen, select F0: Chime Settings.
3. At the Chime Settings screen, select the following option:
^ F1: Loud Chime Volume
^ Select the appropriate voltage/volume level.

IMPORTANT: The F1: Loud Chime Volume option does not contain a submenu. This selection is used for setting the volume when the radio is replaced.