Speaker Replacement - Rear Shelf
Speaker Replacement - Rear ShelfREMOVAL PROCEDURE
1. Remove the rear window trim panel.
2. Disengage the speaker retaining tab. Remove the speaker alignment tabs from the opening in the rear window panel.
The speaker seal may have bonded with the shelf metal. Carefully pry the housing away from the metal while holding the speaker retaining tab in order to remove the speaker.
3. Disconnect the electrical connector from the rear speaker.
4. Remove the rear speaker.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the rear speaker. Position the rear speaker to the rear window panel.
2. Install the speaker alignment tabs into the opening in the rear window panel. Engage the rear speaker retaining tab.
3. Install the rear window trim panel.