Amplifier: Service and Repair

Amplifier Replacement




REMOVAL PROCEDURE
1. Remove the rear window trim panel.

IMPORTANT: Inspect the retainers and the foam washers. Faulty retainers and washers must be replaced.

2. Disengage the amplifier retainers from the rear window panel.
3. Disconnect the electrical connectors from the amplifier.
4. Remove the amplifier.

INSTALLATION PROCEDURE

1. Position the amplifier to the rear window panel.

IMPORTANT: Make sure all of the foam washers are installed.

Faulty retainers must be replaced.
2. Align the retainers to the openings in the rear window panel.
Carefully push in the retainers in order to secure the amplifier.
3. Connect the electrical connectors to the amplifier.
4. Install the rear window trim panel.