LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Diagnostic Tests >> DTC B2823: Trip Odometer Reset Switch Circuit Low >> Testing

DTC B2823: Trip Odometer Reset Switch Circuit Low: Testing

  1. If instrument panel cluster diagnostic check was performed, go to next step. If instrument panel cluster diagnostic check was not performed, go to INSTRUMENT PANEL CLUSTER DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
  2. Install scan tool. Turn ignition switch to ON position. Using scan tool, observe TRIP RESET SWITCH parameter under INSTRUMENT PANEL CLUSTER data list. If scan tool displays OFF, go to next step. If scan tool does not display OFF, go to step  4.
  3. Press and release trip odometer reset switch. Using scan tool, observe TRIP RESET SWITCH parameter. If parameter changes state when reset switch is pressed, see DIAGNOSTIC AIDS . If parameter does not change states, go to next step.
  4. Replace IPC. See INSTRUMENT PANEL CLUSTER (IPC)  under REMOVAL & INSTALLATION. After repair, check system for normal operation.
scientia non olet · About LEMON Manuals