LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Cutaway 6.5 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 276 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Instrument Panel Cluster (IPC) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Ensure ignition is off and key is removed.
  2. Remove IPC trim bezel. Remove IPC mounting screws. Disconnect IPC electrical connectors. Remove IPC from instrument panel.
  3. To install, reverse removal procedure. TIghten IPC screws to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals