Charge Indicator Inoperative
NOTE:
For circuit identification, see WIRING DIAGRAMS in GENERATORS & REGULATORS - CORVETTE article.
- If starting/charging system diagnostic system check has been performed, go to next step. If starting/charging system diagnostic system check has not been performed, see STARTING/CHARGING SYSTEM DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM.
- Turn ignition off and back on again. If battery indicator comes on during bulb check, system is okay at this time. If battery indicator does not come on during bulb check, go to next step.
- Replace IPC. See INSTRUMENT PANEL CLUSTER (IPC) under REMOVAL & INSTALLATION. After repairs, recheck system operation.