Disc Brake Specifications

FRONT DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Disc Diameter

10.197 (259)

Original Thickness

.786 (20)

Minimum Refinish Thickness ⁽¹⁾

.751 (19)

Discard Thickness ⁽²⁾

.736 (19)

Lateral Runout

.003 (.08)

Thickness Variation

.0005 (.013)

⁽¹⁾	Manufacturer does not recommend resurfacing rotors when replacing brake pads. Resurface rotors only when there is a brake pulsation complaint or scoring greater than .060" (1.5 mm).

⁽²⁾	Use specification stamped on rotor (if available).