LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> C3500 HD 6.5 F, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical - 4.3L V6, 5.0L, 5.7L & 7.4L V8 - VINS [W,X,M,R,J]) >> Torque Specifications >> Torque Specifications (4.3L, 5.0L & 5.7L)

Torque Specifications (4.3L, 5.0L & 5.7L)

WARNING: This page does not describe the selected car, but rather 55 other vehicles, including the 1999 Oldsmobile Bravada, 1999 GMC Yukon, 1999 GMC Suburban, 1999 GMC Sonoma, and 1999 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (4.3L, 5.0L & 5.7L)

Application Ft. Lbs. (N.m)
Balance Shaft Gear Bolt
Step 1 15 (20)
Step 2 Additional 35 Degrees
Bellhousing Bolt 35 (47)
Camshaft Sprocket Bolt 18 (25)
Connecting Rod Cap Nut
4.3L
Step 1 20 (27)
Step 2 Additional 70 Degrees
5.0L & 5.7L
Step 1 20 (27)
Step 2 Additional 55 Degrees
Crankshaft Damper Bolt 74 (100)
Crankshaft Oil Deflector Bolt/Nut 27 (36)
Cylinder Head Bolts (1)
Step 1 24 (34)
Step 2 45 (61)
Step 3 65 (90)
Exhaust Manifold Bolt
Step 1 11 (15)
Step 2 22 (30)
Flywheel Bolt 74 (100)
Main Bearing Cap Bolt
4.3L
Step 1 15 (20)
Step 2 Additional 73 Degrees
5.0L & 5.7L
2-Bolt Main 77 (105)
4-Bolt Main Inner 77 (105)
4-Bolt Main Outer 67 (90)
Oil Filter Adapter Bolt (4.3L) 15 (20)
Oil Filter Adapter Bolt (5.0L & 5.7L) 18 (25)
Oil Pan Stud Nut 18 (25)
Oil Pump Bolt 66 (90)
Rocker Arm
4.3L With Press-In Studs
Rocker Stud 35 (47)
Rocker Nut 18 (25)
4.3L With Screw-In Studs
Rocker Stud 35 (47)
Rocker Nut 19 (26)
5.0L & 5.7L (2)
Thermostat Housing Bolt 21 (28)
Valve Lifter Retainer Bolt
4.3L 12 (16)
5.0L & 5.7L 18 (25)
Water Pump Bolt 33 (45)
INCH Lbs. (N.m) 
Balance Shaft Retainer Plate Bolts (4.3L) 106 (12)
Camshaft Retainer Bolt 106 (12)
Front Cover Bolt 106 (12)
Intake Manifold
Upper (4.3)
Step 1 44 (5)
Step 2 88 (10)
Upper (5.0 & 5.7)
Step 1 44 (5)
Step 2 88 (10)
Lower(3)
Step 1 27 (3)
Step 2 106 (12)
Step 3 133 (15)
Oil Pan Bolt Or Stud Bolt 106 (12)
Oil Pan Studs 53 (6)
Oil Pump Cover Bolt 106 (12)
Rear Crankshaft Oil Seal Retainer Bolt 106 (12)
Valve Cover Bolt 106 (12)
(1) Apply GM Sealant (1052080) to head bolt threads. Tighten bolts in sequence. See Figure or Figure .
(2) See VALVE CLEARANCE ADJUSTMENT  under ADJUSTMENTS.
(3) Tighten bolts in sequence. See Figure.