LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> C3500 HD 6.5 F, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical - 4.3L V6, 5.0L, 5.7L & 7.4L V8 - VINS [W,X,M,R,J]) >> Removal & Installation >> Front Cover Oil Seal >> Installation

Front Cover Oil Seal: Installation

WARNING: This page does not describe the selected car, but rather 55 other vehicles, including the 1999 Oldsmobile Bravada, 1999 GMC Yukon, 1999 GMC Suburban, 1999 GMC Sonoma, and 1999 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Coat the crankshaft front cover oil seal lips with clean engine oil. On 4.3L, 5.0L and 5.7L, install NEW seal in front cover with seal lip facing engine using Seal Installer (J-35468). On 7.4L, install NEW seal in front cover with seal lip facing engine using Seal Installer (J-22102).
  2. On all models, apply RTV sealant to Woodruff keyway in crankshaft balancer. Using Damper Puller/Installer (J-23523-F), install crankshaft balancer. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS . To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals