Latched DTC B1018, B1024 Notice (SDM-RSD)

WARNING: This page does not describe the selected car, but rather 249 other vehicles, including the 2004 Saturn Vue, 2004 Saturn L300, 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, and 2004 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When DTC B1018 or B1024 has been set it is necessary to replace the inflatable restraint Sensing & Diagnostic Module (SDM). Setting DTC B1018 or B1024 will also cause DTC B1071 to set. When a scan tool clear codes command is issued & the malfunction is no longer present, DTC B1018 or B1024 & DTC B1071 will remain current. Make sure that the short to ground condition is repaired prior to installing a replacement SDM to avoid damaging the SDM.